AMPCOM CAT7 RJ45 Connector, Pass Through CAT6A rj 45 Ethernet Plug for CAT 7 Solid or Stranded Network Cable with 1.5mm Load Bar 30PCS

 

Product Description

These RJ45 modular connectors are designed to work specifically with CAT6A and CAT7 cables.Max conductor hole is ⌀1.5MM, supporting individual twisted pair conductor wire sizes up to 1.3mm~1.45mm.

 

Perfect Shielded Shell-The shell of the connector is made of anti-interference pure copper material, and the surface is completely nickel-plated, which perfectly protects your network from signal loss and electromagnetic interference. In addition, swallowtail clip design can facilitate the connection of the ground wire, ensure high stability of network transmission, and maximize the opening of the shielding function.

 

50 Micron Gold Plated Contacts provides a fully contact with wire conductor and ensure excellent conductivity ，Maintaining a Superior and Reliable Data Transmission,supporting up to 10 Gigabit transmission speed.

 

2 Piece Pass Through Design Save Your Time–It is generally difficult to install network cables with thick diameters. These crystal heads are equipped with transparent load bars. You can confirm the wire sequence before the insert them into the connector. This can greatly simplify serial authentication and shorten installation time.

 

100% 50U gold plated -compared to other “fake 50U gold plated” on the market, AMPCOM connectors can pass the equipment testing to ensure the best quality to the user

 

Engineering Project Wiring

CAT6A/CAT7/CAT8 Compatible STP RJ45 Plug

 

 

Strict Quality Control System

Tested by Willeke/ CTTL Lab Testing & Certification Lad

 

 

Pass-through Type STP RJ45 Plug

 

 

 

Nickel-plated Copper Shell Case

Nickle Plated Case/ Precision Machining/ Thickened STP Case

 

 

3/50U THicker Gold Plated

 

 

1.5mm Enlarged Aperture

 

 

High-toughness Retaining Clip

 

 

Complimentary Load Bar

 

 

High Quality PC Material

 

 

LG Eco-friendly Flame Retardant Case

 

 

Tri-point Pins Increasing the Contact Area

 

 

Thickened STP Shell Precision Manufacturing

 

 

Rust-resistant Case Passing a 24-hour Salt Spray Test

Note:the data is sourced from Ampcom Lab

 

 

Tail with a Cable Clip

 

 

Easy and Convenient Installation

Load Bar

Exclusive Strain Relief Boots ( Note: Strain Relief Boots are not included)

 

 

Offers an Easy, Convenient, and Simple Way

 

 

The Appearance is More Outstanding

 

 

Exquisite Packaging

This packaging is intended for product display purposes only. Please refer to the actual product packaging and its contents as received.

 

Steps to Crimp Connector

1.Use a tool to remove the outer jacket and trim it to approximately 3 cm in length.

2.Put SR and load bar into the cable in advance and arrange the wire cores according to the 568B.

3.Insert the wire cores into the plug and make sure the wire cores pass through the top wire slots.

4.Place the plug into the crimping tool and then trim off the excess wire cores.

5.Crimp the tail into the port for crimping.

6.Complete.

 

 

Multiple Certifications More Confidence In Use